MemTest86 10.7

• Added AUTOREPORT configuration file parameter to enable/disable automatic saving of test results HTML report when AUTOMODE is enabled
• Added TFTPSTATUSSECS configuration file parameter to set the period to send status XML updates to TFTP server (for management console)
• Modified behaviour for detection of duplicate errors. Errors with the same address (and bits) but occur in different tests are no longer considered to be duplicate.
• Fixed hang when CPU does not support SSE4.1 instructions when running Test 12
• Fixed MINSPDS and EXACTSPDS configuration file parameters being incorrectly set when saving current configuration settings to file
• Fixed escaping of characters in XML messages to TFTP server (for management console)
• Fixed invalid XML tag in XML messages to TFTP server (for management console)
• Report is now automatically saved before the end of test prompt when AUTOMODE=2 is set in configuration file
• Fixed incorrect reference to blacklist flag 'TEST12_ONECPU' (correct flag is 'TEST12_SINGLECPU')
• Updated Russian translations (courtesy of Victor Lutz)
• Added better sanity checking for SPD bytes
• Updated JEDEC manufacture list to JEP106AZ (May 2019)
• Fixed channel mapping for Apollo Lake ECC detection
• Fixed ECC detection for certain Intel Skylake-SP chipsets

Kod:Panoya kopyala

Added REPORTPREFIX configuration file parameter to specify the prefix text to use for the report files
Added TEST12_SINGLECPU flag to blacklist.cfg to force test 12 to run in single CPU mode as a workaround for CPU threads hanging in PARALLEL mode
Added DISABLE_LANG flag to blacklist.cfg to disable language support and font support, which is known to cause issues on some Dell systems
Changed the blacklist.cfg RESTRICT_ADDR flag lower address limit from 0x1000 to 0x100000, as some systems experience issues when writing to the BIOS area (up to 0xFFFFF)
Fixed bug with blacklist.cfg RESTRICT_ADDR flag not setting the lower address limit properly
Fixed buffer overrun bugs detected by HeapGuard when measuring memory latency
Fixed fluctuations in memory/cache speed measurements
Fixed UI issues with System Information screen
Changed "red" error text to "light red" for better readability
Fixed CPU temperature readings for several AMD Ryzen chipsets
Added reporting of Module Manufacturer's Specific Data in DDR4 SPD modules to PXE server for use with Management Console (Site Edition only)
Fixed timing issues with retrieving SPD data on Skylake-X chipset
Fixed decoding of DDR4 SPD Post Package Repair (PPR) (Byte 9)
Fixed decoding of DDR4 SPD Secondary SDRAM Package Type (Byte 10)

Yeni 8.0 sürümü ile daha iyi Ryzen desteği. Sürüm notları için: PassMark MemTest86 - Version History

Sadece UEFI BIOS destekli yeni sürüm.

Version 7.5 (Build 1001) 21/Feb/2018


Fixes/Enhancements

• Fixed AP being reset after every memory segment causing tests to slow down significantly for some systems

Version 7.5 5/Feb/2018


Fixes/Enhancements

• Added check for whether the number of errors exceed a maximum error count. If so, the tests are aborted. This can be configured via the configuration file parameter MAXERRCOUNT. By default the value is 10000
• Added support for Russian language
• Added new configuration file parameter EXITMODE for specifying whether to shutdown or reboot the system on exit
• Added support for reporting to Management Console (PassMark Management Console - Centralized PC Reliability and Load Testing) via XML messages over TFTP (Site Edition only). The status of MemTest86 is periodically reported to the management console
• Added new configuration file parameter TFTPSERVERIP for specifying a different TFTP server IP address for sending report files and reporting to the management console (Site Edition only)
• Added workaround for retrieving configuration files from TFTP servers that don't support the 'get file size' TFTP command (Site Edition only)
• Added workaround for Serva bug when overwriting a file on the TFTP server (Site Edition only)
• Fixed bug with generated HTML/XML files that require character escaping
• Added workaround when firmware EFI_GET_TIME function fails to retrieve the time correctly. A warning is also written to the log file
• Added new flag DISABLE_CONCTRL to blacklist for console control workarounds for older firmware
• Fixed 'ALL' BIOS versions not being parsed properly in blacklist
• Updated blacklist.cfg file with additional baseboards with known issues
• Added more robust detection of CPU hyperthreads
• Added ECC detection support for Intel Skylake-SP chipsets
• Added ECC detection/injection support for AMD Ryzen chipsets
• Added warning message to log file when ECC injection is locked on Atom C2000 chipsets
• Fixed bug with ECC error reporting on Intel Xeon E3 chipsets
• Fixed CPU temperature not being shown for Intel Apollo Lake, Skylake-X and Broadwell-E chipsets
• Added preliminary support for retrieving CPU info for Intel Cannon Lake/Knights Mill chipsets
• Fixed bug with retrieving the number of boosted P-states in AMD chipsets
• Fixed CPU temperature not being read properly on AMD 15h (model >= 40h) chipsets