OGmer
Femtopat
- Katılım
- 28 Ocak 2024
- Mesajlar
- 26
- Çözümler
- 1
Daha fazla
- Cinsiyet
- Erkek
Arkadaşlar merhaba bilgisayarım eski ve Windows 10 32 Bit versiyonunda bulunmaktayım şu an ancak bir karar da Windows 8 64 Bit'e geçmek istedim USB'ye filan format için hazırladım BIOS'tan USB'yi 1 sıraya falan getirdim.
Şu an ise pres anykey filan diyordu. Boot işlemine başlamak için herhangi bir tuşa bastım. Windows logosunun olduğu yerde kaldı ve bir süre sonra bir hata verdi. Bilgisayarı yeniden başlattım. Tekrar aynı işlemleri yaptım yine hala Windows logosunun olduğu yerde kaldı bana anlık yardım edebilecek birisi varsa yardım edebilir mi?
Hata şu şekilde:
Recovery
Your PC needs to be repaired
The operating system couldnt be loaded because a required file is missing or contains errors
File:Cl.dll
Error code:0xc0000098
You'll need to use the recovery tools on your installation Media.İf you dont have any installation Media (like a disc USB device,contact your system administrator or PC manufacturer
Press enter to tey again
Press F8 for startup Settings
F8 basınca çıkanlar şu şekilde:
Startup Settings
Press a number to choose from the options below:
Use number keys or functions keys F1-F9
1)Enable debugging
2)Enable boot logging
3)Enable low resolution video
4)Enable Safe mode
5)Enable Safe mode with networking
6)Enable Safe with command prompt
7)Disable driver signature enforcement
8)Disable early launch anti-malware protection
9)Disable automatic restart after failıre
Şu an ise pres anykey filan diyordu. Boot işlemine başlamak için herhangi bir tuşa bastım. Windows logosunun olduğu yerde kaldı ve bir süre sonra bir hata verdi. Bilgisayarı yeniden başlattım. Tekrar aynı işlemleri yaptım yine hala Windows logosunun olduğu yerde kaldı bana anlık yardım edebilecek birisi varsa yardım edebilir mi?
Hata şu şekilde:
Recovery
Your PC needs to be repaired
The operating system couldnt be loaded because a required file is missing or contains errors
File:Cl.dll
Error code:0xc0000098
You'll need to use the recovery tools on your installation Media.İf you dont have any installation Media (like a disc USB device,contact your system administrator or PC manufacturer
Press enter to tey again
Press F8 for startup Settings
F8 basınca çıkanlar şu şekilde:
Startup Settings
Press a number to choose from the options below:
Use number keys or functions keys F1-F9
1)Enable debugging
2)Enable boot logging
3)Enable low resolution video
4)Enable Safe mode
5)Enable Safe mode with networking
6)Enable Safe with command prompt
7)Disable driver signature enforcement
8)Disable early launch anti-malware protection
9)Disable automatic restart after failıre
Son düzenleme: